Tork Craft: the name everybody knows. Quality tools and accessories for every job. Every new Tork Craft product goes through our Product Testing department for quality approval. Browse the Tork Craft website to experience the extensive catalogue. .
| Tork Craft Website | Catalogue Download |
Item No: TC991340
Large tool bag
Size: 495mm x 265mm x 340mm
Application:
The large tool bag keeps your tools neat & in one place. It is manufactured from
heavy duty nylon to resist tearing.
Features:
A total of 50 pockets.
Shoulder strap.....
R 750.78
Ex VAT:R 652.85
Item No: TC992008
Knee Pads PVC/EVA
Length: 440mm
Rubber Pad Dimensions: 151(L) x 200(W)mm
The knee pads are protective pads that are fasten onto the knees over clothing.
It is ideally used when doing work on floors or roofs. It is extremely h&y when installing laminate floors, tiling
floors, etc.
Application:
Protective pads..
R 516.35
Ex VAT:R 449.00
Item No: TC996114
TorkCraft - Work Apron
with Hammer Loop
Pockets: Qty 14
Application:
Tork Craft work apron
14 Pockets in total. 13 Multi-purpose waist pockets for tools & 1
chest pocket for markers, knives, notes & general similar sized objects. 2
Hammers loops & a quick release buckle for convenience, it's fully a
adju....
R 474.66
Ex VAT:R 412.75
Item No: TCAC006
6mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 400.03
Ex VAT:R 347.85
Item No: TCAC011
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 394.34
Ex VAT:R 342.90
Item No: TCAC012-2
Annular Cutters 55mm long
Annular Cutter: &O/; 12 mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 481.10
Ex VAT:R 418.35
Item No: TCAC013-2
Annular Cutters 55mm long
Annular Cutter: &O/; 13
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 481.10
Ex VAT:R 418.35
Item No: TCAC014-1
Annular Cutters 30mm
Annular Cutter: &O/; 14
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 364.26
Ex VAT:R 316.75
Item No: TCAC015-1
Annular Cutters 30mm
Annular Cutter: &O/; 15
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 345.58
Ex VAT:R 300.50
Item No: TCAC017-2
Annular Cutters 55mm long
Annular Cutter: &O/; 17
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 507.27
Ex VAT:R 441.10
Item No: TCAC020-1
Annular Cutters 30mm
Annular Cutter: &O/; 20
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 457.99
Ex VAT:R 398.25
Item No: TCAC021-1
Annular Cutters 30mm
Annular Cutter: &O/; 21
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 460.52
Ex VAT:R 400.45
Item No: TCAC021-2
Annular Cutters 55mm long
Annular Cutter: &O/; 21 mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 611.74
Ex VAT:R 531.95
Item No: TCAC022-2
Annular Cutters 55mm long
Annular Cutter: &O/; 22
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 644.69
Ex VAT:R 560.60
Item No: TCAC023-1
Annular Cutters 30mm
Annular Cutter: &O/; 23
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 507.50
Ex VAT:R 441.30
Item No: TCAC023-2
Annular Cutters 55mm long
Annular Cutter: &O/; 23
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 685.98
Ex VAT:R 596.50
Item No: TCAC026-1
Annular Cutters 30mm
Annular Cutter: &O/; 26
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 641.07
Ex VAT:R 557.45
Item No: TCAC026-2
Annular Cutters 55mm long
Annular Cutter: &O/; 26
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 804.20
Ex VAT:R 699.30
Item No: TCAC030-2
Annular Cutters 55mm long
Annular Cutter: &O/; 30
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 892.17
Ex VAT:R 775.80
Item No: TCAC031-1
Annular Cutters 30mm
Annular Cutter: &O/; 31
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 782.17
Ex VAT:R 680.15
Item No: TCAC031-2
ANNULAR HOLE CUTTER HSS 31 X 55MM WELD SHANK 19.05MM....
R 740.95
Ex VAT:R 644.30
Item No: TCAC033-1
Annular Cutters 30mm
Annular Cutter: &O/; 33
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 804.20
Ex VAT:R 699.30
Item No: TCAC034-2
ANNULAR HOLE CUTTER HSS 34 X 55MM WELD SHANK 19.05MM....
R 960.88
Ex VAT:R 835.55
Item No: TCAC036-1
Annular Cutters 30mm
Annular Cutter: &O/; 36
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 864.63
Ex VAT:R 751.85
Item No: TCAC036-2
Annular Cutters 55mm long
Annular Cutter: &O/; 36
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,208.31
Ex VAT:R 1,050.70
Item No: TCAC038-1
Annular Cutters 30mm
Annular Cutter: &O/; 38 mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole..
R 1,167.08
Ex VAT:R 1,014.85
Item No: TCAC044-1
Annular Cutters 30mm
Annular Cutter: &O/; 44
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 1,532.72
Ex VAT:R 1,332.80
Item No: TCAC044-2
Annular Cutters 55mm long
Annular Cutter: &O/; 44
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,718.33
Ex VAT:R 1,494.20
Item No: TCAC045-2
Annular Cutters 55mm long
Annular Cutter: &O/; 45
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,785.66
Ex VAT:R 1,552.75
Item No: TCAK10020
L-WRENCH HEX 2.0 X 50 X 15MM CRV BLACK....
R 10.06
Ex VAT:R 8.75
Item No: TCAK10025
L-WRENCH HEX 2.5 55 X 17MM CRV BLACK....
R 10.06
Ex VAT:R 8.75
Item No: TCAK10030
L-WRENCH HEX 3.0 60X 19.5MM CRV BLACK....
R 10.64
Ex VAT:R 9.25
Item No: TCAK10050
L-WRENCH HEX 5.0 X 72 X 26MM CRV BLACK....
R 16.27
Ex VAT:R 14.15
Item No: TCAK10060
L-WRENCH HEX 6.0 X 90 X 32MM CRV BLACK....
R 21.62
Ex VAT:R 18.80
Item No: TCAK10080
L-WRENCH HEX 8.0 X 100 X 36MM CRV BLACK....
R 31.34
Ex VAT:R 27.25
Item No: TCAK10100
L-WRENCH HEX 10 X 100 X 36MM CRV BLACK....
R 52.61
Ex VAT:R 45.75
Item No: TCBB100-100
UTILITY BLADE SOLID 60MM X 19MM X 0.6MM 100PC SK5....
R 267.66
Ex VAT:R 232.75
Item No: TCBB100-50
UTILITY BLADE SOLID 60MM X 19MM X 0.6MM 50PC SK5....
R 177.27
Ex VAT:R 154.15
Item No: TCBB3016C
BUSHING FOR BLADES 30-16MM 1/CARD....
R 19.78
Ex VAT:R 17.20
Item No: TCBC18650
BATTERY CHARGER USB 18650 LI-ION AVG, 800mAh 1PC 5V/1A....
R 133.69
Ex VAT:R 116.25
Item No: TCBF100-2W
Stitched buff
Material:
Cotton
Width: 20mm
Diameter: &O/;100mm
Sections: 2
Bore: &O/;1/2'
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound & polishing buff is selected
for the job.
The cutting com..
R 175.03
Ex VAT:R 152.20
Item No: TCBF10030
Buffing wheel kit
Buffing wheels in the kit:
(x1) &O/;100mm Sisal stitched buff
(x1) &o/;100mm denim stitched buff
(x1) &o/;100mm cotton stitched buff
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound & polishing buff is selected
for ..
R 317.06
Ex VAT:R 275.70
Item No: TCBF150-3C
Stitched buff
Material: Denim
Width: 30mm
Diameter: &O/;150mm
Sections: 3
Bore: &O/;1/2'
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound & polishing buff is selected
for the job.
The cutting compou..
R 272.09
Ex VAT:R 236.60
Item No: TCBF150-3W
Stitched buff
Material:
Cotton
Width: 30mm
Diameter: &O/;150mm
Sections: 3
Bore: &O/;1/2'
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound & polishing buff is selected
for the job.
The cutting com..
R 391.35
Ex VAT:R 340.30
Item No: TCBF200-3W
Stitched buff
Material:
Cotton
Width: 30mm
Diameter: &O/;200mm
Sections: 3
Bore: &O/;1/2'
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound & polishing buff is selected
for the job.
The cutting com..
R 474.66
Ex VAT:R 412.75
Item No: TCBP115-2
Backing pad for angle grinder
Backing pad to be used with an angle grinder with M14 thread.
DIA: 115mm
THREAD: M14
Hook & Loop: No
DENSITY: Soft
MAX RPM: 11,500
Application:
This is a backing pad for an angle grinder to use fibre discs.
The range of fibre discs can be viewed
here.
CAUTION:
Due to the high rotation speed of angle ..
R 102.47
Ex VAT:R 89.10
Item No: TCBP115-3
Backing pad for angle grinder
Backing pad to be used with an angle grinder with M14 thread.
DIA: 115mm
THREAD: M14
Hook & Loop: No
DENSITY: Hard
MAX RPM: 11,500
Application:
This is a backing pad for an angle grinder to use fibre discs.
The range of fibre discs can be viewed
here.
CAUTION:
Due to the high rotation speed of angle ..
R 107.01
Ex VAT:R 93.05
Item No: TCBU11606
TorkCraft - Round Point Rotary Burr
Diameter: 10 mm
Cutting Length: 25 mm
Max Operating Speed: 65000RPM
Application:
The Tork Craft Rotary burr for cutting steel, stainless steel, cast iron,
high alloy, & brass. For a smooth surface finish. Max operating speed is
65000RPM but the recommended starting speed is ..
R 275.77
Ex VAT:R 239.80
Item No: TCBU20612
TorkCraft - Cylindrical Rotary Burr + Bottom Cutter
Diameter: 12 mm
Cutting Length: 25 mm
Max Operating Speed: 65000RPM
Application:
The Tork Craft Rotary burr for cutting steel, stainless steel, cast iron,
high alloy, & brass. For a smooth surface finish. Max operating speed is
65000RPM but the recommended st..
R 461.78
Ex VAT:R 401.55
Item No: TCBU21606
TorkCraft - 60° Cone Rotary Burr
Diameter: 8 mm
Cutting Length: 7 mm
Max Operating Speed: 65000RPM
Application:
The Tork Craft Rotary burr for cutting steel, stainless steel, cast iron,
high alloy, & brass. For a smooth surface finish. Max operating speed is
65000RPM but the recommended starting speed is 40000RPM..
R 196.59
Ex VAT:R 170.95