TOOLFAN drilling

Item No: TC362017

Titanium coated drill saw Diameter: &O/;10.0mm Application: Turn your electric drill into a high-speed drill saw. The drill saw is made from HSS (hi-speed steel) coated with Titanium nitride for superior cutting speed & edge retention. The drill saw can be used to drill into or cut/rasp: Wood Plasterboard Masonry board Soft me..

R 198.20

Ex VAT:R 172.35

Ask Question Ask Question

Item No: TC373101-2

STEP DRILL SET 3PCE IN BLISTER

Step drill set Use one drill for many holes. Multiple step & countersink tool for drilling & countersinking in one smooth operation. SIZE: &O/;3-13mm STEP HEIGHT: 4mm STEEL: HSS (High-speed steel) SIZE: &O/;5-13mm STEP HEIGHT: 8mm STEEL: HSS (High-speed steel) SIZE: &O/;6-19mm; STEP HEIGHT: 5mm STEEL: HSS (High-speed ste..

R 656.19

Ex VAT:R 570.60

New Expected Date :

15/05/2025

Ask Question Ask Question

Item No: TC911001

HOLE SAW CARBON STEEL 19MM

Carbon steel hole saw Hole saw diameter: &o/;19mm Use m&rel: TC917009 Application: The carbon steel hole saw is covered with a black oxide finish to prevent rust. Holes can be quickly & efficiently drilled in wood, composite materials & plastic. Maximum depth of cut is 19mm. IMPORTANT: Do not use the carbon steel hole s..

R 21.56

Ex VAT:R 18.75

Ask Question Ask Question

Item No: TC911006

HOLE SAW CARBON STEEL 35MM

Carbon steel hole saw Hole saw diameter: &o/;35mm Use m&rel: TC917012 Application: The carbon steel hole saw is covered with a black oxide finish to prevent rust. Holes can be quickly & efficiently drilled in wood, composite materials & plastic. Maximum depth of cut is 19mm. IMPORTANT: Do not use the carbon steel hole s..

R 29.90

Ex VAT:R 26.00

Ask Question Ask Question

Item No: TC911007

HOLE SAW CARBON STEEL 38MM

Carbon steel hole saw Hole saw diameter: &o/;38mm Use m&rel: TC917012 Application: The carbon steel hole saw is covered with a black oxide finish to prevent rust. Holes can be quickly & efficiently drilled in wood, composite materials & plastic. Maximum depth of cut is 19mm. IMPORTANT: Do not use the carbon steel hole s..

R 31.05

Ex VAT:R 27.00

Ask Question Ask Question

Item No: TC911016

CARBON STEEL HOLE SAW 67MM

Carbon steel hole saw Hole saw diameter: &o/;67mm Use m&rel: TC917012 Application: The carbon steel hole saw is covered with a black oxide finish to prevent rust. Holes can be quickly & efficiently drilled in wood, composite materials & plastic. Maximum depth of cut is 19mm. IMPORTANT: Do not use the carbon steel hole s..

R 46.00

Ex VAT:R 40.00

Ask Question Ask Question

Item No: TC911018

CARBON STEEL HOLE SAW 73MM

Carbon steel hole saw Hole saw diameter: &o/;73mm Use m&rel: TC917012 Application: The carbon steel hole saw is covered with a black oxide finish to prevent rust. Holes can be quickly & efficiently drilled in wood, composite materials & plastic. Maximum depth of cut is 19mm. IMPORTANT: Do not use the carbon steel hole s..

R 50.66

Ex VAT:R 44.05

Ask Question Ask Question

Item No: TC915005

HOLE SAW TCT 20MM FOR METAL

TCT hole saw Hole saw diameter: &o/;20mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic & metals up to 14.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast i..

R 112.41

Ex VAT:R 97.75

Ask Question Ask Question

Item No: TC915023

HOLE SAW TCT 38MM FOR METAL

TCT hole saw Hole saw diameter: &o/;38mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic & metals up to 14.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast i..

R 246.39

Ex VAT:R 214.25

Ask Question Ask Question

Item No: TC915030

HOLE SAW TCT 45MM FOR METAL

TCT hole saw Hole saw diameter: &o/;45mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic & metals up to 14.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast i..

R 281.75

Ex VAT:R 245.00

Ask Question Ask Question

Item No: TC915043

HOLE SAW TCT 64MM FOR METAL

TCT hole saw Hole saw diameter: &o/;64mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic & metals up to 14.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast i..

R 417.05

Ex VAT:R 362.65

Ask Question Ask Question

Item No: TC915046

HOLE SAW TCT 75MM FOR METAL

TCT hole saw Hole saw diameter: &o/;75mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic & metals up to 14.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast i..

R 461.55

Ex VAT:R 401.35

Ask Question Ask Question

Item No: TC915049

HOLE SAW TCT 90MM FOR METAL

TCT hole saw Hole saw diameter: &o/;90mm Application: The multiple precision ground Tungsten Carbide Tipped hole saw has been specially developed to cut holes in hard materials such as plastic & metals up to 14.5mm in thickness. The hole saw can be used to cut into: Mild steel sheets Stainless steel sheets Steel pipes Cast i..

R 622.84

Ex VAT:R 541.60

Ask Question Ask Question

Item No: TCAC006

DRILL BIT HSS W/WELDON SHANK 6MM

6mm HSS Drill bit - Weldon Shank High Speed Steel drill bit with Weldon shank. Quality Tork Craft product. What is a Weldon Shank? The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....

R 400.03

Ex VAT:R 347.85

Ask Question Ask Question

Item No: TCAC011

DRILL BIT HSS W/WELDON SHANK 11MM

11mm HSS Drill bit - Weldon Shank High Speed Steel drill bit with Weldon shank. Quality Tork Craft product. What is a Weldon Shank? The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....

R 394.34

Ex VAT:R 342.90

Ask Question Ask Question

Item No: TCAC012-2

ANNULAR HOLE CUTTER HSS 12 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 12 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 481.10

Ex VAT:R 418.35

Ask Question Ask Question

Item No: TCAC013-2

ANNULAR HOLE CUTTER HSS 13 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 13 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 481.10

Ex VAT:R 418.35

Ask Question Ask Question

Item No: TCAC014-1

ANNULAR HOLE CUTTER HSS 14 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 14 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 364.26

Ex VAT:R 316.75

Ask Question Ask Question

Item No: TCAC015-1

ANNULAR HOLE CUTTER HSS 15 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 15 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 345.58

Ex VAT:R 300.50

Ask Question Ask Question

Item No: TCAC017-2

ANNULAR HOLE CUTTER HSS 17 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 17 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 507.27

Ex VAT:R 441.10

Ask Question Ask Question

Item No: TCAC020-1

ANNULAR HOLE CUTTER HSS 20 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 20 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 457.99

Ex VAT:R 398.25

Ask Question Ask Question

Item No: TCAC021-1

ANNULAR HOLE CUTTER HSS 21 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 21 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 460.52

Ex VAT:R 400.45

Ask Question Ask Question

Item No: TCAC021-2

ANNULAR HOLE CUTTER HSS 21 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 21 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 611.74

Ex VAT:R 531.95

Ask Question Ask Question

Item No: TCAC022-2

ANNULAR HOLE CUTTER HSS 22 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 22 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 644.69

Ex VAT:R 560.60

Ask Question Ask Question

Item No: TCAC023-1

ANNULAR HOLE CUTTER HSS 23 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 23 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 507.50

Ex VAT:R 441.30

Ask Question Ask Question

Item No: TCAC023-2

ANNULAR HOLE CUTTER HSS 23 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 23 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 685.98

Ex VAT:R 596.50

Ask Question Ask Question

Item No: TCAC026-1

ANNULAR HOLE CUTTER HSS 26 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 26 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 641.07

Ex VAT:R 557.45

Ask Question Ask Question

Item No: TCAC026-2

ANNULAR HOLE CUTTER HSS 26 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 26 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 804.20

Ex VAT:R 699.30

Ask Question Ask Question

Item No: TCAC030-2

ANNULAR HOLE CUTTER HSS 30 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 30 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 892.17

Ex VAT:R 775.80

Ask Question Ask Question

Item No: TCAC031-1

ANNULAR HOLE CUTTER HSS 31 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 31 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 782.17

Ex VAT:R 680.15

Ask Question Ask Question

Item No: TCAC031-2

ANNULAR HOLE CUTTER HSS 31 X 55MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER HSS 31 X 55MM WELD SHANK 19.05MM....

R 740.95

Ex VAT:R 644.30

Ask Question Ask Question

Item No: TCAC033-1

ANNULAR HOLE CUTTER HSS 33 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 33 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 804.20

Ex VAT:R 699.30

Ask Question Ask Question

Item No: TCAC034-2

ANNULAR HOLE CUTTER HSS 34 X 55MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER HSS 34 X 55MM WELD SHANK 19.05MM....

R 960.88

Ex VAT:R 835.55

Ask Question Ask Question

Item No: TCAC036-1

ANNULAR HOLE CUTTER HSS 36 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 36 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 864.63

Ex VAT:R 751.85

Ask Question Ask Question

Item No: TCAC036-2

ANNULAR HOLE CUTTER HSS 36 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 36 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 1,208.31

Ex VAT:R 1,050.70

Ask Question Ask Question

Item No: TCAC038-1

ANNULAR HOLE CUTTER HSS 38 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 38 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole..

R 1,167.08

Ex VAT:R 1,014.85

Ask Question Ask Question

Item No: TCAC044-1

ANNULAR HOLE CUTTER HSS 44 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 44 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 1,532.72

Ex VAT:R 1,332.80

Ask Question Ask Question

Item No: TCAC044-2

ANNULAR HOLE CUTTER HSS 44 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 44 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 1,718.33

Ex VAT:R 1,494.20

Ask Question Ask Question

Item No: TCAC045-2

ANNULAR HOLE CUTTER HSS 45 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 45 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 1,785.66

Ex VAT:R 1,552.75

Ask Question Ask Question

Item No: TCCH28030

CHISEL SDS MAX FLAT 18 X 280 X 25MM

Flat Chisel Diameter: 18mm Length: 280mm Blade Length: 25mm The Tork Craft SDS Max Flat Chisel is for chiseling applications in masonry & concrete, has a flat . for chiseling & stripping of wall/floor tiles, plaster etc. Compatible with SDS Max shank machines. Application: Contractor Construction Industrial..

R 149.10

Ex VAT:R 129.65

Ask Question Ask Question

Item No: TCCH40000-2

CHISEL SDS PLUS POINTED 14 X 400MM

TorkCraft - Pointed Chisel Diameter: 14 mm Length: 400 mm Application: The Tork Craft SDS Plus Pointed Chisel is for chiseling applications in masonry & concrete, has a sharp . for precise chiseling & clearning & cleaning of joints. Compatible with SDS + shank machines For Masonry & Concrete Clearing &....

R 130.76

Ex VAT:R 113.70

Ask Question Ask Question

Item No: TCCH40030

CHISEL SDS MAX FLAT 18 X 400 X 25MM

Flat Chisel Diameter: 18mm Length: 400mm Blade Length: 25mm The Tork Craft SDS Max Flat Chisel is for chiseling applications in masonry & concrete, has a flat . for chiseling & stripping of wall/floor tiles, plaster etc. Compatible with SDS Max shank machines. Application: Contractor Construction Industrial..

R 184.58

Ex VAT:R 160.50

Ask Question Ask Question

Item No: TCCH40040

CHISEL SDS MAX FLAT 18 X 400 X 40MM

Flat Chisel Diameter: 18mm Length: 400mm Blade Length: 40mm The Tork Craft SDS Max Flat Chisel is for chiseling applications in masonry & concrete, has a flat . for chiseling & stripping of wall/floor tiles, plaster etc. Compatible with SDS Max shank machines. Application: Contractor Construction Industrial..

R 224.83

Ex VAT:R 195.50

Ask Question Ask Question

Item No: TCDT010-01

DECKING TOOL 10G STD HEAD PRE-DRILL & COUNTERSINK

TorkCraft - Decking Tool Kit Diameter: 3.6 mm CSK Diameter: 9.2 mm CSK Angle: 45 Degrees Hole Depth: 30 mm Application: The Tork Craft Decking Tool, the ultimate all-in-one pre-drilling countersink tool! Purpose built of decking & woodworking applications, especially where stainless steel screws are used. The single drilling co..

R 640.78

Ex VAT:R 557.20

Ask Question Ask Question

Item No: TCFB38

FORSTNER BIT 38MM CARDED

Forstner bits by Tork Craft 38mm Forstner bit Drill pocket holes, flat bottom holes, etc. using any 10mm or larger portable drill or stationary drill press. Forstner pattern bits are well known for their ability to drill clean & chip-free holes in wood. Made of quality steel. Large gullets milled in the tool body provide exceptional ..

R 219.19

Ex VAT:R 190.60

Ask Question Ask Question

Item No: TCGD08

GLASS & TILE DRILL 8MM

TorkCraft - 8mm Glass & Tile Drill Bit Size: 8 mm Carded Pack: Qty 1 Application: For precision drilling in glass, mirrors, ceramic & marble tiles. If the tile is on the wall, use a masonry bit to finish the hole once through the tile. If the tile is on the wall use a masonry bit to finish the hole o....

R 84.35

Ex VAT:R 73.35

Ask Question Ask Question

Item No: TCGD10

GLASS & TILE DRILL 10MM

TorkCraft - 10mm Glass & Tile Drill Bit Size: 10 mm Carded Pack: Qty 1 Application: For precision drilling in glass, mirrors, ceramic & marble tiles. If the tile is on the wall, use a masonry bit to finish the hole once through the tile. If the tile is on the wall use a masonry bit to finish the hole....

R 96.89

Ex VAT:R 84.25

Ask Question Ask Question

Item No: TCGD12

GLASS & TILE DRILL 12MM

TorkCraft - 12mm Glass & Tile Drill Bit Size: 12 mm Carded Pack: Qty 1 Application: For precision drilling in glass, mirrors, ceramic & marble tiles. If the tile is on the wall, use a masonry bit to finish the hole once through the tile. If the tile is on the wall use a masonry bit to finish the hole....

R 108.50

Ex VAT:R 94.35

Ask Question Ask Question

Item No: TCGDX010

GLASS & TILE DRILL 10MM 4 FLUTE WITH HEX SHANK

TorkCraft - 10mm Glass & Tile Drill Bit With Hex Shank Size: 10 mm Carded Pack: Qty 1 Application: For precision drilling in glass, mirrors, ceramic & marble tiles. If the tile is on the wall, use a masonry bit to finish the hole once through the tile. If the tile is on the wall use a ma....

R 159.39

Ex VAT:R 138.60

Ask Question Ask Question

Item No: TCGDX012

GLASS & TILE DRILL 12MM 4 FLUTE WITH HEX SHANK

TorkCraft - 12mm Glass & Tile Drill Bit With Hex Shank Size: 12 mm Carded Pack: Qty 1 Application: For precision drilling in glass, mirrors, ceramic & marble tiles. If the tile is on the wall, use a masonry bit to finish the hole once through the tile. If the tile is on the wall use a ma....

R 176.93

Ex VAT:R 153.85

Ask Question Ask Question

TOOLFAN

Drilling

Filter

Info & Terms

Customer Service