Steel and Metals Annular

Item No: TCAC031-1

ANNULAR HOLE CUTTER HSS 31 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 31 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 782.17

Ex VAT:R 680.15

Ask Question Ask Question

Item No: TCAC031-2

ANNULAR HOLE CUTTER HSS 31 X 55MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER HSS 31 X 55MM WELD SHANK 19.05MM....

R 740.95

Ex VAT:R 644.30

Ask Question Ask Question

Item No: TCAC033-1

ANNULAR HOLE CUTTER HSS 33 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 33 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 804.20

Ex VAT:R 699.30

Ask Question Ask Question

Item No: TCAC034-2

ANNULAR HOLE CUTTER HSS 34 X 55MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER HSS 34 X 55MM WELD SHANK 19.05MM....

R 960.88

Ex VAT:R 835.55

Ask Question Ask Question

Item No: TCAC036-1

ANNULAR HOLE CUTTER HSS 36 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 36 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 864.63

Ex VAT:R 751.85

Ask Question Ask Question

Item No: TCAC036-2

ANNULAR HOLE CUTTER HSS 36 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 36 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 1,208.31

Ex VAT:R 1,050.70

Ask Question Ask Question

Item No: TCAC038-1

ANNULAR HOLE CUTTER HSS 38 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 38 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole..

R 1,167.08

Ex VAT:R 1,014.85

Ask Question Ask Question

Item No: TCAC044-1

ANNULAR HOLE CUTTER HSS 44 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 44 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 1,532.72

Ex VAT:R 1,332.80

Ask Question Ask Question

Item No: TCAC044-2

ANNULAR HOLE CUTTER HSS 44 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 44 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 1,718.33

Ex VAT:R 1,494.20

Ask Question Ask Question

Item No: TCAC045-2

ANNULAR HOLE CUTTER HSS 45 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 45 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 1,785.66

Ex VAT:R 1,552.75

Ask Question Ask Question

Item No: TCMD001

TOOL HOLDER MT2 X 19.05 (INNER) FOR WELDON SHANK MORSE TAPER

TOOL HOLDER MT2 X 19.05 (INNER) FOR WELDON SHANK MORSE TAPER....

R 1,406.46

Ex VAT:R 1,223.01

Ask Question Ask Question

Item No: TCAC012-3

ANNULAR HOLE CUTTER TCT 12 X 35MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER TCT 12 X 35MM WELD SHANK 19.05MM....

R 845.54

Ex VAT:R 735.25

Ask Question Ask Question

Item No: TCAC014-4

ANNULAR HOLE CUTTER TCT 14 X 55MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER TCT 14 X 55MM WELD SHANK 19.05MM....

R 956.63

Ex VAT:R 831.85

Ask Question Ask Question

Item No: TCAC016-4

ANNULAR HOLE CUTTER TCT 16 X 55MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER TCT 16 X 55MM WELD SHANK 19.05MM....

R 956.63

Ex VAT:R 831.85

Ask Question Ask Question

Item No: TCAC020-3

ANNULAR HOLE CUTTER TCT 20 X 35MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER TCT 20 X 35MM WELD SHANK 19.05MM....

R 845.54

Ex VAT:R 735.25

Ask Question Ask Question

Item No: TCAC024-3

ANNULAR HOLE CUTTER TCT 24 X 35MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER TCT 24 X 35MM WELD SHANK 19.05MM....

R 845.54

Ex VAT:R 735.25

Ask Question Ask Question

Item No: TCAC028-3

ANNULAR HOLE CUTTER TCT 28 X 35MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER TCT 28 X 35MM WELD SHANK 19.05MM....

R 901.08

Ex VAT:R 783.55

Ask Question Ask Question

Item No: TCAC030-3

ANNULAR HOLE CUTTER TCT 30 X 35MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER TCT 30 X 35MM WELD SHANK 19.05MM....

R 901.08

Ex VAT:R 783.55

Ask Question Ask Question

Item No: TCAC032-3

ANNULAR HOLE CUTTER TCT 32 X 35MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER TCT 32 X 35MM WELD SHANK 19.05MM....

R 1,111.76

Ex VAT:R 966.75

Ask Question Ask Question

Item No: TCAC032-4

ANNULAR HOLE CUTTER TCT 32 X 55MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER TCT 32 X 55MM WELD SHANK 19.05MM....

R 1,278.40

Ex VAT:R 1,111.65

Ask Question Ask Question

Item No: TCAC070-3

ANNULAR HOLE CUTTER TCT 70 X 30MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER TCT 70 X 30MM WELD SHANK 19.05MM....

R 2,664.03

Ex VAT:R 2,316.55

Ask Question Ask Question

Item No: TCAC070-4

ANNULAR HOLE CUTTER TCT 70 X 55MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER TCT 70 X 55MM WELD SHANK 19.05MM....

R 3,109.31

Ex VAT:R 2,703.75

Ask Question Ask Question

Item No: TCAC075-4

ANNULAR HOLE CUTTER TCT 75 X 55MM WELD SHANK 31.75MM

ANNULAR HOLE CUTTER TCT 75 X 55MM WELD SHANK 31.75MM....

R 3,482.78

Ex VAT:R 3,028.50

Ask Question Ask Question

Item No: TCAC083-3

ANNULAR HOLE CUTTER TCT 83 X 30MM WELD SHANK 31.75MM

ANNULAR HOLE CUTTER TCT 83 X 30MM WELD SHANK 31.75MM....

R 3,822.72

Ex VAT:R 3,324.10

Ask Question Ask Question

Item No: TCAC083-4

ANNULAR HOLE CUTTER TCT 83 X 55MM WELD SHANK 31.75MM

ANNULAR HOLE CUTTER TCT 83 X 55MM WELD SHANK 31.75MM....

R 4,419.34

Ex VAT:R 3,842.90

Ask Question Ask Question

Item No: TCAC090-3

ANNULAR HOLE CUTTER TCT 90 X 30MM WELD SHANK 31.75MM

ANNULAR HOLE CUTTER TCT 90 X 30MM WELD SHANK 31.75MM....

R 4,068.82

Ex VAT:R 3,538.10

Ask Question Ask Question

Item No: TCAC102-4

ANNULAR HOLE CUTTER TCT 102 X 55MM WELD SHANK 31.75MM

ANNULAR HOLE CUTTER TCT 102 X 55MM WELD SHANK 31.75MM....

R 6,723.30

Ex VAT:R 5,846.35

Ask Question Ask Question

Item No: TCAC0005-04

PILOT PIN TCT CUTTER 18MM - 102MM X 50MM 7.9 X 108MM BROACH CUTTE

PILOT PIN TCT CUTTER 18MM - 102MM X 50MM 7.9 X 108MM BROACH CUTTE....

R 119.72

Ex VAT:R 104.10

Ask Question Ask Question

Item No: TCAC008

DRILL BIT HSS W/WELDON SHANK 8MM

8mm HSS Drill bit - Weldon Shank High Speed Steel drill bit with Weldon shank. Quality Tork Craft product. What is a Weldon Shank? The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....

R 329.76

Ex VAT:R 286.75

Ask Question Ask Question

Item No: TCAC009

DRILL BIT HSS W/WELDON SHANK 9MM

9mm HSS Drill bit - Weldon Shank High Speed Steel drill bit with Weldon shank. Quality Tork Craft product. What is a Weldon Shank? The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....

R 414.40

Ex VAT:R 360.35

Ask Question Ask Question

Item No: TCAC012-1

ANNULAR HOLE CUTTER HSS 12 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 12 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole..

R 383.53

Ex VAT:R 333.50

Ask Question Ask Question

Item No: TCAC013-1

ANNULAR HOLE CUTTER HSS 13 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 13 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 364.26

Ex VAT:R 316.75

Ask Question Ask Question

Item No: TCAC015-2

ANNULAR HOLE CUTTER HSS 15 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 15 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 460.52

Ex VAT:R 400.45

Ask Question Ask Question

Item No: TCAC016-1

ANNULAR HOLE CUTTER HSS 16 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 16 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 391.35

Ex VAT:R 340.30

Ask Question Ask Question

Item No: TCAC017-1

ANNULAR HOLE CUTTER HSS 17 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 17 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 409.63

Ex VAT:R 356.20

Ask Question Ask Question

Item No: TCAC018-2

ANNULAR HOLE CUTTER HSS 18 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 18 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 584.20

Ex VAT:R 508.00

Ask Question Ask Question

Item No: TCAC019-2

ANNULAR HOLE CUTTER HSS 19 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 18 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 597.94

Ex VAT:R 519.95

Ask Question Ask Question

Item No: TCAC020-2

ANNULAR HOLE CUTTER HSS 20 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 20 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 603.46

Ex VAT:R 524.75

Ask Question Ask Question

Item No: TCAC022-1

ANNULAR HOLE CUTTER HSS 22 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 22 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 512.61

Ex VAT:R 445.75

Ask Question Ask Question

Item No: TCAC024-1

ANNULAR HOLE CUTTER HSS 24 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 24 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 552.46

Ex VAT:R 480.40

Ask Question Ask Question

Item No: TCAC025-1

ANNULAR HOLE CUTTER HSS 25 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 25 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 542.97

Ex VAT:R 472.15

Ask Question Ask Question

Item No: TCAC025-2

ANNULAR HOLE CUTTER HSS 25 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 25 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 776.65

Ex VAT:R 675.35

Ask Question Ask Question

Item No: TCAC027-1

ANNULAR HOLE CUTTER HSS 27 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 27 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 641.07

Ex VAT:R 557.45

Ask Question Ask Question

Item No: TCAC028-2

ANNULAR HOLE CUTTER HSS 28 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 28 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 823.40

Ex VAT:R 716.00

Ask Question Ask Question

Item No: TCAC030-1

ANNULAR HOLE CUTTER HSS 30 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 30 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 680.46

Ex VAT:R 591.70

Ask Question Ask Question

Item No: TCAC034-1

ANNULAR HOLE CUTTER HSS 34 X 30MM WELD SHANK 19.05MM

ANNULAR HOLE CUTTER HSS 34 X 30MM WELD SHANK 19.05MM....

R 817.94

Ex VAT:R 711.25

Ask Question Ask Question

Item No: TCAC040-1

ANNULAR HOLE CUTTER HSS 40 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 40 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 1,182.20

Ex VAT:R 1,028.00

Ask Question Ask Question

Item No: TCAC042-2

ANNULAR HOLE CUTTER HSS 42 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 42 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 1,510.76

Ex VAT:R 1,313.70

Ask Question Ask Question

Item No: TCAC046-2

ANNULAR HOLE CUTTER HSS 46 X 55MM WELD SHANK 19.05MM

Annular Cutters 55mm long Annular Cutter: &O/; 46 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about ..

R 1,917.63

Ex VAT:R 1,667.50

Ask Question Ask Question

Item No: TCAC048-1

ANNULAR HOLE CUTTER HSS 48 X 30MM WELD SHANK 19.05MM

Annular Cutters 30mm Annular Cutter: &O/; 48 mm One way to avoid dimpling & deburring while making holes in tube & pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the ..

R 1,661.98

Ex VAT:R 1,445.20

Ask Question Ask Question

TOOLFAN

Annular

Filter

Info & Terms

Customer Service