Item No: DR55060
Double end stubby HSS
Drill diameter: &O/;6.0mm
Packaging: Packet of 10
Point: 135° split .
Drill bit: HSS (Hi-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) & is
precision fully ground at 135° with a split ..
The split . adds 2 extra cutting edges with the adantage of reducing the
am....
R 388.82
Ex VAT:R 338.10
Item No: DR60050
HSS st&ard drill bit
Drill diameter: &O/;5.0mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) & is roll forged.
St&ard HSS 118° angle . drill bits are designed as an all purpose drill
bit & it will drill into steel, non-ferrous metals & plastic.
Sharpen..
R 142.77
Ex VAT:R 124.15
Item No: DR60060
HSS st&ard drill bit
Drill diameter: &O/;6.0mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) & is roll forged.
St&ard HSS 118° angle . drill bits are designed as an all purpose drill
bit & it will drill into steel, non-ferrous metals & plastic.
Sharpen..
R 184.40
Ex VAT:R 160.35
Item No: DR60065
HSS st&ard drill bit
Drill diameter: &O/;6.5mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) & is roll forged.
St&ard HSS 118° angle . drill bits are designed as an all purpose drill
bit & it will drill into steel, non-ferrous metals & plastic.
Sharpen..
R 208.15
Ex VAT:R 181.00
Item No: DR60080
HSS st&ard drill bit
Drill diameter: &O/;8.0mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) & is roll forged.
St&ard HSS 118° angle . drill bits are designed as an all purpose drill
bit & it will drill into steel, non-ferrous metals & plastic.
Sharpen..
R 309.29
Ex VAT:R 268.95
Item No: DR60082
HSS st&ard drill bit
Drill diameter: &O/;8.2mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) & is roll forged.
St&ard HSS 118° angle . drill bits are designed as an all purpose drill
bit & it will drill into steel, non-ferrous metals & plastic.
Sharpen..
R 350.92
Ex VAT:R 305.15
Item No: DR60105
DRILL BIT HSS STANDARD 10.5MM X5 PACK....
R 255.76
Ex VAT:R 222.40
Item No: PG46502
HEX SHANK DRILL BIT 2MM....
R 75.27
Ex VAT:R 65.45
Item No: TC353042
Step drill
Use one drill for many holes. Multiple step & countersink tool for drilling
& countersinking in one smooth operation.
SIZE: &O/;6-18mm
STEP DIAMETER: 2mm
STEP HEIGHT: 4mm
STEEL: HSS (High-speed steel)
Application:
Suitable for materials with a maximum thickness of 4 to 6mm depending on the
hardness. The best type of dr..
R 275.37
Ex VAT:R 239.45
Item No: TC353045
Step drill
Use one drill for many holes. Multiple step & countersink tool for drilling
& countersinking in one smooth operation.
SIZE: &O/;4-22mm
STEP DIAMETER: 2mm
STEP HEIGHT: 5mm
STEEL: HSS (High-speed steel)
Application:
Suitable for materials with a maximum thickness of 4 to 6mm depending on the
hardness. The best type of dr..
R 396.92
Ex VAT:R 345.15
Item No: TC353046
Step drill
Use one drill for many holes. Multiple step & countersink tool for drilling
& countersinking in one smooth operation.
SIZE: &O/;5-35mm
STEP HEIGHT: 6mm
STEEL: HSS (High-speed steel)
STEP DIAMETERS:
5, 7.5, 10, 13, 16, 19, 21, 23, 26, 29, 31, 33 & 35mm
Application:
Suitable for materials with a maximum thickness of 4 t..
R 953.35
Ex VAT:R 829.00
Item No: TCAC0001
Morse Taper to Weldon adaptor
MT3 to Weldon Adaptor
Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,168.52
Ex VAT:R 1,016.10
Item No: TCAC0002
Morse Taper to Weldon adaptor
MT2 to Weldon Adaptor
Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,333.43
Ex VAT:R 1,159.50
Item No: TCAC0004
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
....
R 53.71
Ex VAT:R 46.70
Item No: TCAC0005
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
55 mm Annular Cutters
Pilot pin with length of 102 mm specifically for annular cutters (broach
cutters) with a cutting length of 55 mm.
....
R 57.21
Ex VAT:R 49.75
Item No: TCAC010
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 437.35
Ex VAT:R 380.30
Item No: TCAC014-2
Annular Cutters 55mm long
Annular Cutter: &O/; 14
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 453.62
Ex VAT:R 394.45
Item No: TCAC016-2
Annular Cutters 55mm long
Annular Cutter: &O/; 16
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 515.49
Ex VAT:R 448.25
Item No: TCAC018-1
Annular Cutters 30mm
Annular Cutter: &O/; 18
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 411.01
Ex VAT:R 357.40
Item No: TCAC019-1
Annular Cutters 30mm
Annular Cutter: &O/; 19
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 419.23
Ex VAT:R 364.55
Item No: TCAC024-2
Annular Cutters 55mm long
Annular Cutter: &O/; 24
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 749.17
Ex VAT:R 651.45
Item No: TCAC027-2
Annular Cutters 55mm long
Annular Cutter: &O/; 27
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 731.00
Ex VAT:R 635.65
Item No: TCAC028-1
Annular Cutters 30mm
Annular Cutter: &O/; 28
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 584.20
Ex VAT:R 508.00
Item No: TCAC032-1
Annular Cutters 30mm
Annular Cutter: &O/; 32
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 795.92
Ex VAT:R 692.10
Item No: TCAC032-2
Annular Cutters 55mm long
Annular Cutter: &O/; 32
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 840.31
Ex VAT:R 730.70
Item No: TCAC033-2
Annular Cutters 55mm long
Annular Cutter: &O/; 33
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 927.88
Ex VAT:R 806.85
Item No: TCAC035-1
Annular Cutters 30mm
Annular Cutter: &O/; 35
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 845.42
Ex VAT:R 735.15
Item No: TCAC035-2
Annular Cutters 55mm long
Annular Cutter: &O/; 35
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,098.37
Ex VAT:R 955.10
Item No: TCAC038-2
Annular Cutters 55mm long
Annular Cutter: &O/; 38
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,373.27
Ex VAT:R 1,194.15
Item No: TCAC040-2
Annular Cutters 55mm long
Annular Cutter: &O/; 40
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 1,373.27
Ex VAT:R 1,194.15
Item No: TCAC042-1
Annular Cutters 30mm
Annular Cutter: &O/; 42
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 1,318.30
Ex VAT:R 1,146.35
Item No: TCAC045-1
Annular Cutters 30mm
Annular Cutter: &O/; 45
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 1,340.27
Ex VAT:R 1,165.45
Item No: TCAC046-1
Annular Cutters 30mm
Annular Cutter: &O/; 46
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the ..
R 1,628.98
Ex VAT:R 1,416.50
Item No: TCAC050-2
Annular Cutters 55mm long
Annular Cutter: &O/; 50
mm
One
way to avoid dimpling & deburring while making holes in tube & pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
..
R 2,473.02
Ex VAT:R 2,150.45
Item No: TCAC055-1
ANNULAR HOLE CUTTER HSS 55 X 30MM WELD SHANK 19.05MM....
R 1,923.15
Ex VAT:R 1,672.30
Item No: TCAC058-1
ANNULAR HOLE CUTTER HSS 58 X 30MM WELD SHANK 19.05MM....
R 1,785.66
Ex VAT:R 1,552.75
Item No: ALP613015
//HSS COBALT JOBBER DRILLS BITS
Size:
&o/; 15.0 x 169/114 mm
Bulk: Qty 1
Range of application:
5% cobalt-alloyed jobber drills with high heat-resistance for drilling steels with tensile strength over 800 N/mm², specially suitable for high alloyed steels, bearing-steels, hot/cold-rolled steel. Ideal for stainless steel.
....
R 1,158.63
Ex VAT:R 1,007.50
Item No: ALP613016
//HSS COBALT JOBBER DRILLS BITS
Size:
&o/; 16.0 x 178/120 mm
Bulk: Qty 1
Range of application:
5% cobalt-alloyed jobber drills with high heat-resistance for drilling steels with tensile strength over 800 N/mm², specially suitable for high alloyed steels, bearing-steels, hot/cold-rolled steel. Ideal for stainless steel.
....
R 1,402.48
Ex VAT:R 1,219.55
Item No: ALP65250040
ALPEN SC CENTREDRILL 4.0X10.00....
R 2,494.52
Ex VAT:R 2,169.15
Item No: ALP728007291
ALPEN STEP DRILL HSS Co5 TIN 6-37MM....
R 7,213.49
Ex VAT:R 6,272.60
Item No: DR55030-1
Tork Craft - Double end stubby HSS
Drill diameter: &O/;3.0mm
Packaging: Bulk - 1 Piece
Point: 135° split .
Drill bit: HSS (High-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) & is
precision fully ground at 135° with a split ..
The split . adds 2 extra cutting edges with the adanta....
R 18.23
Ex VAT:R 15.85
Item No: DR55048-1
Tork Craft - Double end stubby HSS
Drill diameter: &O/;4.8mm
Packaging: Bulk - 1 Piece
Point: 135° split .
Drill bit: HSS (High-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) & is
precision fully ground at 135° with a split ..
The split . adds 2 extra cutting edges with the adanta....
R 30.25
Ex VAT:R 26.30
Item No: DR55060-1
Tork Craft - Double end stubby HSS
Drill diameter: &O/;6.0mm
Packaging: Bulk - 1 Piece
Point: 135° split .
Drill bit: HSS (High-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) & is
precision fully ground at 135° with a split ..
The split . adds 2 extra cutting edges with the adanta....
R 41.92
Ex VAT:R 36.45
Item No: MAY221013
ALPEN HSS 1869R-FORTE 3/480 13.00MM....
R 2,172.12
Ex VAT:R 1,888.80
Item No: DR11002
DRILL BIT HSS STANDARD 2.0MM HEX SHANK 1/CARD....
R 16.96
Ex VAT:R 14.75
Item No: DR11008
DRILL BIT HSS STANDARD 8.0MM HEX SHANK 1/CARD....
R 48.93
Ex VAT:R 42.55
Item No: DR21002
DRILL HSS 2.0MM 135DEG 1/CARD HEX SHANK INDUSTRIAL BIT....
R 19.44
Ex VAT:R 16.90
Item No: DR21004
DRILL HSS 4.0MM 135DEG 1/CARD HEX SHANK INDUSTRIAL BIT....
R 36.23
Ex VAT:R 31.50
Item No: ALP6550015
HSS COBALT GRIP 1,5 PLW....
R 123.74
Ex VAT:R 107.60
Item No: ALP655002
HSS COBALT GRIP 2,0 PLW....
R 115.40
Ex VAT:R 100.35